Upgrade Your Ride: Pro’s Pick Wheel Tubs, Custom-Fit Superweave Covers, and More!

April 1, 2025 by Drive

Pro’s Pick Wheel Tubs

Pro’s Pick has recently released wheel tubs. They are made in North America from quality 16 gauge steel and will come in three different sizes. Measuring 3 inches deep, 5 inches deep, and 7.5 inches deep, these options cover everything from simply needing a little extra room for a modern wheel setup, to needing a lot of extra space for a pro-street setup. With a flat surface mounting area, these tubs will be suitable to weld-in or bolt-in to an existing bed. Being a quality 16 gauge metal, they are suitable to work with if some extra modification and trimming is required.

$360-$390
www.pros-pick.com 
or call 888-515-7489 

Custom-Fit Superweave Truck Covers

Superweave is designed to provide premium outdoor, all-weather storage protection. It is Cal Car Cover’s most UV, water, and weather resistant car and truck cover. The versatile Superweave material features unsurpassed moisture, dust, and pollutant protection. The encapsulation technology goes inside the fabric and around the fibers, resulting in a silky-smooth finish that glides over fine paint finishes. The car cover fabric is also dust-proof, so it will keep your vehicle clean whether it is stored indoors or out. It remains exceptionally breathable, allowing moisture, condensation and heat to easily escape from under the car cover. Its unique lightweight design also enables it to fold up to one-third the size of your typical outdoor car and truck cover but does not take away from its ability to protect your automobile’s finish. The material is easy to care for because it is washer and dryer safe. Backed by a four-year limited warranty, the Superweave car and truck covers can be ordered in one or two-tone color combinations. Available in Gray, Taupe, Blue, Red, or Black. Made in the USA.

www.calcarcover.com

DuroBumps DBF212

Upgrade your Toyota and Lexus truck’s off-road experience with DuroBumps DBF212 Front Off-Road Bump Stops. Expertly crafted in the USA, these bump stops offer smooth, progressive dampening, eliminating hard bottom-outs and the “shell-shock” effect. Designed for off-road enthusiasts and daily drivers, they enhance ride quality, reduce wear on suspension components, and ensure improved off-road control. Experience the DuroBumps difference and elevate your off-road adventures today!

MSRP: $214.99
durobumps.com

NEW PRODUCT RELEASE – Detroit Speed FN988 Assembled Center Sections – Ford Modular 9” Housing Utilizing 8.8” Gears

Looking for the strength of a Ford 9-inch but the reduced noise and increased efficiency of an 8.8-inch?  Now you can have the best of both worlds with Detroit Speed’s FN988 center section: a 9-inch housing utilizing 8.8-inch internal components in five different gear ratios.

Features/Benefits: 

• Patent-pending design utilizes an 8.8-inch gear set, which is quieter and more efficient than standard 9-inch components
• High-strength nodular cast iron case
• Available in the following gear ratios: 3.08, 3.27, 3.55, 3.73, and 4.10
• Forged alloy steel carrier bearing caps
• 31-spline Eaton Truetrac 8.8-inch differential
• Premium ring-and-pinion utilizing ARP ring bolts with safety wire
• 1350 forged steel pinion yoke and U-bolt kit
• Threaded jack bolt holes in mounting flange ease case removal from axle housing
• Case includes mounting holes for bolt-on accessories
• Continous lubrication of pinion bearings provided by internal oil channels
• olid pinion preload spacer
• Designed and engineered at DSE and made in USA

Is it possible to have a Ford 9-inch without an annoying amount of gear whine?  Of course, but at what cost?  How much time and money are you going to spend chasing down the issue when you can now simply bolt an 8.8-inch center section into your 9-inch housing thanks to the engineers at DSE?  Detroit Speed now offers five different gear ratios and a complete assembly that will bolt directly into your 9-inch housing.  Complete with forged alloy steel carrier bearing caps, a high-strength nodular case, safety-wired ARP hardware, a 1350 forged steel pinion yoke, and a 31-spline Eaton Truetrac differential, it’s built to handle some serious power and deliver it quietly and more efficiently than any 9-inch.

EMISSIONS

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

SUPPORTING PRODUCTS

• 071501DS – DETROIT SPEED FORD 9 IN. QUADRALINK NARROWED HOUSING – TORINO FLANGE – POWDERCOATED SATIN BLACK – 1st Gen F-Body
• 071535DS – DETROIT SPEED FORD 9 IN. QUADRALINK NARROWED HOUSING – TORINO FLANGE – POWDERCOATED SATIN BLACK – 67-70 Mustang
• 074001DS – DETROIT SPEED FORD 9 IN. QUADRALINK NARROWED HOUSING – C7 FLOATER – BARE (1st Gen F-Body)
• 074503DS – DETROIT SPEED FORD 9 IN. QUADRALINK NARROWED HOUSING – C7 FLOATER – POWDERCOATED SATIN BLACK (2nd Gen F-Body)
• 071025AGX – GEARFX FORD 9 IN. HOUSING – TORINO FLANGE – BARE – 68-72 GM A-Body
• LABOR-DYNO – GEARFX SERVICE – DYNO RUN – FORD 9 IN. CENTER SECTION BREAK-IN
• LABOR-REM – GEARFX SERVICE – REM SURFACE FINISHING ring-and-pinion

SETUP INFORMATION

Go Cordless with Summit Racing 20V Cordless Power Tools

It’s hard to beat cordless power tools. They’re easy to use, portable, and eliminate the extension cords you used to trip over in the shop.

If you need more nudging to upgrade to cordless power tools, take a look at Summit Racing 20V Cordless Tools. Don’t let the affordable price throw you. These are high-quality tools with features like powerful brushless motors that can run much longer on a charge than a brushed motor, integrated LED work lights, and ergonomically designed grips for comfortable operation.

Summit Racing 20V Cordless Tools use the same 2.0 aH and 4.0 aH lithium-ion batteries and chargers. That eliminates the frustration of having a bunch of batteries that aren’t compatible with all of your cordless tools. Both batteries provide plenty of power, but the 4.0 aH battery’s higher capacity means it can provide almost twice the run time of the 2.0 aH battery.

Summit Racing 20V Cordless Tools are available by themselves, with a 2.0 aH or 4.0 aH battery, or with a battery and charger. Batteries and the charger are also available separately so you can add more as your tool collection grows.

Take a look at Summit Racing 20V Cordless Tools and see which ones will work best for you. Once you use one and see how good it is, we’re betting you’ll get the whole family for your shop.

20V Brushless Impact Wrenches:

• Rated at 200 lb-ft (3/8-inch) and 300 lb-ft (1/2-inch) of torque
• Integrated LED work light
• Variable speed trigger
• Forward and reverse settings
• Carrying case and belt hook included

20V 2-Speed Brushless Drill

• 3/8-inch keyless chuck
• 20-position adjustable clutch to prevent stripped screws
• Screw/drill/hammer modes
• Integrated LED work light
• Variable speed trigger
• Forward and reverse settings
• Carrying case and belt hook included

20V 1/4-Inch Brushless Impact Driver 

• Rated at 180 lb-ft of torque
• Integrated LED work light
• Quick-change locking collet
• Variable speed trigger
• Forward and reverse settings
• Carrying case and belt hook included

20V Brushless Angle Grinder

• Ideal for cutting metal, grinding tile, sanding, polishing, and sharpening
• Slim design fits into tight spaces
• Speeds up to 8,000 RPM
• Lock-off protection prevents accidental startups
• Locks in the ON position for continuous use
• Metal mesh filter keeps out dust for longer tool life
• Carrying case included
• Requires Summit Racing 20V 4.0 aH battery

20V Cordless Orbital Polisher

• Easy-to-read digital display
• Variable speed control from 500 to 3,000 RPM
• Easy reach on/off switch and speed adjustments
• Spindle lock for fast and easy pad changes
• Soft grip handle for comfortable extended use
• 7-inch backing plate, wool pad, and foam pad included
• Requires Summit Racing 20V 4.0 aH battery

20V Brushless Metal Circular Saw

• Cut channel, pipe, square tubing, sheet metal, and more
• Two-speed control
• 5 3/8-inch diameter, 30-tooth carbide-tipped metal cutting blade
• Cutting depth up to 1.8 inches
• Angle adjustment for bevel cuts of up to 45 degrees
• Can be used with wood cutting blade, not included
• Carrying bag included
• Requires Summit Racing™ 20V 4.0 aH battery

Summit also offers a 20V Cordless Tire Inflator and a 20V Cordless Multi-Purpose Inflator to inflate tires, air mattresses, beach balls, or whatever else needs inflating at the shop or wherever you are. They use the same batteries and chargers as our other tools.

ummit Racing Equipment
www.SummitRacing.com
1-800-230-3030

Get Strong, Consistent Welds with a Summit Racing Multi-Process MIG or TIG Welder

Summit Racing Multi-Process MIG and TIG Welders feature smooth arc starts with minimal spatter in an assortment of models to suit your needs and budget.

Summit Racing Multi-Process MIG Welders 

Weld steel, carbon steel, and copper with a Summit Racing Multi-Process MIG Welder. They allow you to weld using gas shielded or gasless wire methods in MIG or MMA (stick) configurations. Features include:

• 4.5-foot ground clamp cable
• MIG torch with 7- or 9-foot lead (depending on model)
• Electrode holder with 6.6-foot lead
• Welds .030- to .045-inch maximum diameter solid and cored wire (depending on model)
• Side mount quick wire feed system
• Cleaning brush
• Handheld welding mask
• Gas regulator (except 80-amp welder)

Summit Racing Multi-Process MIG Welders are available with 120-volt, 120-/220-volt, and 220-volt input voltages and output ranges between 80-200 amps DC current.

Summit Racing Multi-Process TIG Welder

The Summit Racing Multi-Process TIG Welder is easy to set up thanks to its IGBT converter. The converter allows you to adjust the current range for deeper penetration on thick carbon steel or thin-gauge steel, stainless steel, and aluminum. Additional features include:

• Four mode adjustments for AC balance, welding current, current down slope, and gas time
• 10-160 amp AC/DC output current
• 220-volt power cord with 120-volt adapter
• 4.5-foot ground clamp cable
• TIG torch with 9-foot lead
• Electrode holder with 6.6-foot lead for stick welding
• Wire slag brush
• Handheld welding mask
• Gas regulator with 3-foot gas line
• Foot pedal

Summit Racing Equipment
www.SummitRacing.com
1-800-230-3030

Protect Your Truck’s Bed from Damage with a Dee Zee X-Mat Truck Bed Mats

You toss a lot of things in your truck’s bed, so why not toss in something that protects it from damage? A DeeZee X-Mat Truck Bed Mat will keep your truck bed free from scratches, dings, and dents caused by loading and unloading cargo or when loads shift during transport.

X-Mats are made from 3/8-inch-thick, high-density fiber infused rubber that resists abrasion and tears. The tightly compressed rubber fibers withstand gasoline, oil, and most chemicals, making them perfect when transporting motorcycles, ATVs, mowers, and other motorized equipment. X-Mats also deflect harmful UV rays and will not crack, cut, or tear even in the most extreme temperatures. Rubber cleats on the underside of the X-Mats keep them securely in place even when you’re not hauling cargo, and they facilitate water passage to the OE bed drains to prevent rusting.

Dee Zee X-Mat Truck Bed Mats are available for many 2002-23 Chevy/GMC, Dodge/Ram, Ford, and Jeep pickups.

Summit Racing Equipment
www.SummitRacing.com
1-800-230-3030